• Fast, Free Delivery
  • 30-day Risk-Free Trial
  • Two-year Warranty

UGREEN MFi Certification 90 Degree USB-C to Lightning Cable

Charge your iPhone 14 from 0% to 60% in just 30 mins.And it also support the data transfer rates up to 480Mbps.
$15.99
  • Features new C94 connector and MFI certified chip
  • Supports fast charging for iPhone 14 and other series
  • Features a 90 degrees design

Size: 3FT

3FT
6FT

Pay with Ease

visapaypalmaestroamerican expressdiscoverapple paydiners clubjcbshopify payklarna
Overview
Overview

 

About the error message "This accessory may not be supported by device" :
The message would appear if you were using an unauthorized wall charger or in poor contact, but even if you are using an original iphone accessory, the error can also happen for the firmware problem with iOS.

After analysis, the causes of this problem may be the following:
· Device lightning port contains impurities such as fiber and debris, resulting in poor contact.
· The voltage of the wall charger is too low or unstable, resulting in insufficient power supply.
· The lightning end is corroded/stained, resulting in poor contact.
· Circuit logic problems/system problems with charging equipment.
· The chip or mainboard of the cable is damaged.

You can try the following solutions:
· You can use a pushpin to clean out the pocket lint or debris from the charging port.
· Wipe the Lightning end with a tissue to remove dirt and oxidation marks on the lightning end.
· Use the original charger or MFi authorized charger, because some laptop USB output ports may have insufficient power output.
· You can use a pushpin to clean out the pocket lint or debris from the charging port.
· Wipe the Lightning end with a tissue to remove dirt and oxidation marks on the lightning end.
· Use the original charger or MFi authorized charger, because some laptop USB output ports may have insufficient power output.
About the error message "This accessory may not be supported by device" :
The message would appear if you were using an unauthorized wall charger or in poor contact, but even if you are using an original iphone accessory, the error can also happen for the firmware problem with iOS.

After analysis, the causes of this problem may be the following:
· Device lightning port contains impurities such as fiber and debris, resulting in poor contact.
· The voltage of the wall charger is too low or unstable, resulting in insufficient power supply.
· The lightning end is corroded/stained, resulting in poor contact.
· Circuit logic problems/system problems with charging equipment.
· The chip or mainboard of the cable is damaged.

You can try the following solutions:
· You can use a pushpin to clean out the pocket lint or debris from the charging port.
· Wipe the Lightning end with a tissue to remove dirt and oxidation marks on the lightning end.
· Use the original charger or MFi authorized charger, because some laptop USB output ports may have insufficient power output.
· You can use a pushpin to clean out the pocket lint or debris from the charging port.
· Wipe the Lightning end with a tissue to remove dirt and oxidation marks on the lightning end.
· Use the original charger or MFi authorized charger, because some laptop USB output ports may have insufficient power output.

Specs
Specs
SKU 60763(3FT), 60765(6FT)
Connector A USB-C
Connector B Lightning
Surface Material Nylon
Cable Length 1M
Connector Type Usb C to Lightning
Cable Type Type-C
Gauge 6
Specification Met No
Data Transfer Rate 60 Megabytes Per Second
Wattage 20 watts
Product Dimensions 39.37 x 0.39 x 0.39 inches
Item Weight 1.76 ounces
Reviews
Reviews